Intermediate Crimped Wire Mesh
The single intermediate crimped means the weft wire is pre-crimped and the warp wire is directly woven. 3×3 mesh single intermediate crimped wire mesh including 3 openings per inch. Using 0.8-3.0mm diameter wire, by single intermediate crimped weaving, woven 3 mesh opening for 5-7mm solid particles. This wire diameter and mesh with ratio reasonable, flat surface, strong wear resistance and firm structure.
Weave Patterns:
Material:
Standard materials of flat top crimped wire mesh are low/mild/high carbon steel and stainless steel 201, 202, 304, 316, 321, 410, 430.
Following material available:
Copper: brass, pure copper, phosphor bronze
Aluminum: 1050, 1060, 1100, 5052, 5056
Nickel: pure nickel, nickel alloy, monel
Features:
Intercrimped assure the proper locking of the warp and weft wires;
Superior rigidity and greater stability;
Strong wear resistance and firm structure.
Usage:
Vibrating Screens
Architecture
Decorative grill
Cabinetry/mill work
Windows
Specifications:
Roll Width: 1m, 1.22m, 1.5m to 4m.
Roll Length: 15m, 30m, 60m to 90m.
| 3Mesh Single Intermediate Crimped Mesh |
| Wire Diameter | Opening | Open Area Rate |
| mm | Inch | mm | Inch | % |
| 3.0 | 0.1181 | 5.466 | 0.2152 | 41.68 |
| 2.6 | 0.1023 | 5.866 | 0.2309 | 48.01 |
| 2.3 | 0.0905 | 6.166 | 0.2427 | 53.04 |
| 2.0 | 0.0787 | 6.466 | 0.2545 | 58.33 |
| 1.8 | 0.0708 | 6.666 | 0.2624 | 62.00 |
| 1.6 | 0.0629 | 6.866 | 0.2703 | 65.77 |
| 1.4 | 0.0551 | 7.066 | 0.2782 | 69.66 |
| 1.2 | 0.0472 | 7.266 | 0.2860 | 73.66 |
| 1.0 | 0.0393 | 7.466 | 0.2939 | 77.77 |
| 0.8 | 0.0314 | 7.666 | 0.3018 | 81.99 |
Other Specifications according to your requirements.
Packing: Crimped wire mesh is packed in rolls,wrapped in moisture-proof paper or plastic film, outside wooden cases or wooden pallet.
|
|
3Mesh Single Intermediate Crimped Wire Mesh for Vibrating, Architecture, Decorative Images
|
